 |
3620-9A Whitehall Road Anderson, SC 29626 USA |
Telephone: (864) 226-6990 Fax: (864) 225-4565 |
 Made in USA |
Ham Sticks® for HF Mobile Operation
| PEP RATING 600 WATTS | |||||
|---|---|---|---|---|---|
| CAT. # | BAND | 2:1 BAND WIDTH | CAT. # | BAND | 2:1 BAND WIDTH |
| 9175* | 75 Meters | 10 KHz | 9117 | 17 Meters | BAND |
| 9160 | 60 Meters | 60 KHz | 9115 | 15 Meters | 350 KHz |
| 9140 | 40 Meters | 60 KHz | 9112 | 12 Meters | BAND |
| 9130 | 30 Meters | BAND | 9110 | 10 Meters | 1 MHz |
| 9120 | 20 Meters | 175 KHz | 9106 | 6 Meters | 2 MHz |
| * 3.75 to 4.00 MHz | |||||
 |
When these mobile HF antennas were first introduced by WD4BUM, they created quite a stir in the amateur antenna industry because of their unique low profile design and outstanding performance. Since that time they have been copied and imitated by other manufacturers, but none have improved upon the original HAM STICK® design! These two-piece MONOBAND ANTENNAS consist of a hollow fiberglass base section approximately 1/2 inch diameter with the loading coil wound directly on the fiberglass and covered with PVC shrink tubing. The plated brass base fitting has 3/8 inch X 24 TPI male threads that fit most amateur mobile mounts. The top section is a tapered 17-7 PH tempered Stainless Steel whip that telescopes into the base section for frequency adjustment. It is secured by two set screws. The assembled, adjusted antenna will be approximately 7 feet long. High mounting on the vehicle is desirable and not a problem because the antenna is VERY resilient and will withstand abuse that would destroy conventional metal antennas. No spring or guy wiring is required.
$28.95 USE OF A QUICK DISCONNECT SUCH AS OUR 009HD IS RECOMMENDED. RECOMMENDED MOUNTS |
